127 Ratings

0% (0)
0% (0)
0% (0)
0% (0)
0% (0)
Mauricio
DE
Ich bin ein Cosplayer, also habe ich vom ersten Tag an angefangen, Rüstungen zu tragen.
2024-06-25
Francisco
Mexico
Es una buena opción si empiezas a incursionar en el tema de impresiones 3D. Muy fácil de calibrar y operarla.
2024-06-25
Michael
us
So if you've used a 3D printer before, this one should be a good fit for you. If you're looking for your first printer, this one probably wouldn't be your first choice. It's a bit of a hassle to set up and use the 2 extruder. But if you follow the instructions/video, you should be able to do it without much trouble, just 1.5x the work. Once leveled, oh, and it prints some nice two-tone prints.
2024-06-24
Tony
US
For someone who has never used 3D printing (like myself) this is a great product, it comes with everything out of the box and is very easy to assemble. I just want to say this printer performs very well and has never failed to print since I bought it. Great value for money, definitely recommend
2024-06-24
Jashon
US
The easy assembly, very reliable user interface, and excellent engraving accuracy make this product well worth the money!
2024-06-22
Mike
US
It was very easy to assemble. The print came out great. I would recommend this product.
2024-06-22
Orion
US
As I write this review, I have 500 hours on this machine. It works non-stop in my home office. I have never bought anything as fast as this printer before and I even bought another one for my office where I actually work. For the price, this technology is great, it's easy to set up and prints well. I have 12 printers in total and this one is now my go-to.
2024-06-22
Brain
US
Well packaged and setup is a breeze You can be up and printing in 15 minutes or less. Initial setup is intuitive and easy to follow. A small amount of filament is included The menu system is very user friendly and intuitive Easy to service and replace nozzles and components.
2024-06-22
Terry
US
Just got mine, and out of the box I got pretty decent prints by doing the following: 1) Z-depth sensor is set to 1mm from the bottom (it says in the manual 'near the bottom'. 2) Calibrate the bed with E1 5-6 times, twice cold 2-3 times hot, this is ensure the bed is more accurate when hot, because the majority of your printing will be with a heated bed. 3) When calibrating E2 do not put any pressure on the extruder when trying to tighten the two screws back up, if you do when E2 heats up after hours of printing thermal expansion will lift the extruder up, since all your doing when pushing down on it is binding up the screw threads. Here is a test of the usual boat, it had some stringing around the top of the arch way, but that is to be expected since their aren't any supports.
2024-06-21
Robson
Italy
Appena tirata fuori dagli schemi, la stampante funziona benissimo e, a parte il fissaggio al portale e il collegamento di alcuni cavi, è più facile da usare rispetto alla maggior parte delle stampanti su carta. È una stampante perfetta se si desidera una stampante conveniente che stampi. La protezione contro l'interruzione di corrente funziona benissimo. L'interruttore di esaurimento del filamento funziona benissimo.
2024-06-21
Rick
US
Everything fit right and works good
2024-06-21
Jay
CA
This Moore x clay machine is very small and easy to operate. It is a birthday gift for my daughter. She likes it very much. As soon as she received it, she printed some small toys and cute cups.
2024-06-20
Mark
US
One of the things I like most about this clay printer is that it prints very quickly. It took me less than 2 hours to print this vase. The printing process was also very smooth and the finished product was very perfect.
2024-06-20
Nancy
CA
The VEHO 800 20 from Tronxy is an excellent product. Thanks to its advanced technology, it can gradually print with incredible precision.Its printing speed is impressive, and the details of the model are sharp and clear.In addition, it is easy to use, thanks to its intuitive interface and all instructions.With this 3D printer, you can realize all your ideas and create something unique and personalized. Whether you are a professional or a hobbyist, Tronxy's 3D printing provides extraordinary results.
2024-06-19
John
US
I have been using it for more than two months. It did take me a few failed attempts and some YouTube videos to get everything right, but once you understand the basic principles, it prints perfectly.
2024-06-19