127 Ratings

0% (0)
0% (0)
0% (0)
0% (0)
0% (0)
SQ
Singapore
Have no idea how this product earned so many stars. Barely 3 months after owning this product my parts started to break down one by one. The support staff hardly understands your problem, and was even told to replace my own parts at some point. This printer is so bad that i hardly get any proper prints out of it. Reddit reviews speak for itself, i won’t elaborate further.
2024-12-20
Darrin
US
After slicing the STL to eliminate the need for those tree supports, I successfully printed the top and bottom of the Dalek dome at 165% I now began to complete the "fairing", which is the piece that mounts to the front of the dome where the eyestalk will move up and down.
2024-11-11
Alfred
US
First fun print on my new huge printer: Sauron's helmet from LOTR. Print time: 4 days 12 hours 19 minutes. Filament: 2,433 grams. First layer went down smoothly. Ran it with a raft to make sure the supports didn't fall. I'm sure there are ways of printing it faster and with less supports, but didn't want to chance it. Supports look good. Wish me luck.
2024-11-01
Pete
UK
Here’s my 800 which I’ve been working on for a while and it’s strictly for ASA..! it’s in progress. I’m really close.!
2024-10-28
Nico
US
Here are a few of the prints I've made with the 1000-16 since I bought it. In my case, all prints were done with PLA or PLA+, using a standard print head, 0.6mm nozzle and sliced ​​in Cura.
2024-10-18
David
us
My veho 1000 came with a pei sheet.
2024-09-21
David
us
My veho 1000 came with a pei sheet
2024-09-21
Darrin
US
I printed a large clock to compare the print speed of the TronXY VEHO 1000-16 using a 0.6mm nozzle to the much smaller Neptune 3 Max and Klipper-powered Neptune 4 Max. I have to say, I was impressed with the TronXY. Speed-wise, it surpassed the 3 Max, and it goes to show that you can get some great prints at respectable speeds with a 0.6mm nozzle.
2024-09-11
Steve
US
I've had this clay printer for a month now and I've used it to make several vases and home decor items. The prints are perfect and the glaze is very beautiful.
2024-09-06
Jame
US
Very cute mini clay printer that doesn't take up space
2024-09-06
Bill
US
I bought this MOORE X 6080 clay printer a month ago. This purchase experience is very pleasant. The seller's service is particularly good. With their help, I have successfully run this printer. This is the finished product I printed.
2024-09-04
Jose
DE
Der Moore X6080 Clay Printer wird seinem Ruf für hohe Kapazität, Hochgeschwindigkeitsdruckfähigkeiten und Benutzerfreundlichkeit gerecht und ist damit eine hervorragende Wahl für den 3D-Druck mit Ton.
2024-09-04
Jack
US
Initial Setup and Unboxing Once I received the Moore X6080 clay printer, the unboxing process was straightforward. The printer’s solid construction and rugged build were evident from the outset, with the 600mm x 600mm x 800mm dimensions lending it a sturdy, industrial feel. The packaging ensured that each component was well protected, and detailed assembly instructions were included Assembly and Configuration The assembly process was relatively smooth, thanks to the clear instructions and well-organized components. The printer comes with the exclusive OSG Dual Core Guide Rails, which ensure smooth and precise movement. Once assembled, it was straightforward to connect the printer to a power source and set up the air compressor for feed mode, with the compressor handling the material feed efficiently.
2024-09-04
Sam Dekok
Canada
Veho800 complete overhaul. Interesting machine. Some improvements made versus x5sa gantry etc.
2024-08-26
Doug Adams
US
Came yesterday. Was way easier to assemble than anticipated. Overall consider it a hell of a value to use to mod. My first corexy and Bowden... Seems a strange combo. The fit and finish are first rate, easy to build straight and strong.
2024-08-22